The 5 elements needed to ensure the efficient production of sand making machines

[Sand making machine]-5 elements needed to ensure the efficient production of sand making machine
 
In the sand and gravel production line, the use of crushers makes it easy to make sand for some large materials, and the use of sand making machines plays a role in subsequent shaping of the crushed materials. After analyzing the production of the sand making machine, it was found that some conditions required for the high-performance production of the sand making machine were found. Only after such conditions are reached, the production activities of the sand making machine can maintain high efficiency and smoothly.

So, what are the condition factors required for efficient production of sand making machine?
 
1. In the setting of the feeding device of the sand making machine, a relatively uniform process specification is required. The difference in particle size during feeding is reduced to an extremely small size. Under such conditions, the sand making machine will be very high-speed once it runs, and as the inertial force increases, its smoothness will be very high.
 
2. In the process of selecting the crushing cavity of the sand making machine, we found that it is not the narrow and long crushing cavity that allows the material to stay in it for a long time to make the sand making machine useful for sand making operations. This requires us to compare the time to determine the time-consuming steps in the entire process. Under normal circumstances, in the case of medium and low yields, we choose the 2-3 cavity design, and in the case of high yields, we choose to connect The streamlined design of even one cavity.
 
3. In the cavity design of the sand making machine, the streamlined structure of a cavity requires us to control the particle size to the right level. Not all particle size control theories can be applied to the working cavity design of this type of sand making machine. After comparing the excellent manufacturing process, we found that the crusher with U-shaped cavity is very suitable for this kind of production needs.
 
4. The new high-performance sand making machine production line needs to be controlled in particle shape. We use an incentive-type computer control system for particle shape control. The advantage of this method is that it is very autonomous and automated. After the grain shape does not meet the requirements, it is impossible to produce a fine cavities. When some cavity-type mechanism adjustment operations occur, due to the use of fully automatic sensor installation, labor costs are greatly saved.
 
5. The sorting and screening of the sand making machine can be laid at the outlet of the sand making machine to reduce unnecessary loss.