Precautions for use and maintenance of crawler mobile crushi
The birth of the crawler mobile crushing plant can be described as a revolution in the crushing industry.
Especially its suitable crushing site is small, construction waste treatment, various improvements and innovations in construction waste crushing are highly sought after by the industry. This equipment is a series of rock and construction waste crushing equipment, which greatly expands the concept of coarse crushing and fine crushing. Its design philosophy is to stand from the customer's standpoint, and to eliminate the obstacles that the crushing site, environment, complex basic configuration and complex logistics bring to the customer's crushing operation, as the primary solution.
One of the important factors to ensure the continuous and normal operation of the crusher during normal use, improper operation or negligence in the operation process, is often an important cause of equipment and personal accidents. The correct operation is to strictly follow the operating procedures.
Maintenance work should do the following:
1. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the life of the bearing, it directly affects the service life and operation rate of the machine, so the injected lubricating oil must be clean and the seal must be good. The main oil injection of this machine (1) Rotating bearing (2) Roll bearing (3) All gears (4) Moving bearing and sliding plane.
2. The newly installed wheel tyres are prone to loosening and must be checked frequently.
3. Pay attention to whether all parts of the machine work normally.
4. Pay attention to check the degree of wear of easily worn parts, and pay attention to replacing worn parts at any time.
5. On the plane of the bottom frame of the movable device, dust and other objects should be removed to prevent the movable bearing from moving on the bottom frame when the machine encounters unbreakable materials, which may cause serious accidents.
6. If the bearing oil temperature rises, stop and check the cause immediately to eliminate it.
7. If the rotating gear is running, if there is an impact sound, stop and check it immediately and eliminate it.